• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a warm way to heat a room and save energy. However, they need an amount of care.

Many small modern wood burning stove wood stoves conform to EPA emissions guidelines. You can check for an EPA sticker on the grate or underneath it to make sure your stove doesn't emit harmful pollutants.

How to start a Wood Fire

The sound and smell of a wood fire could be a wonderful feature in any house. It's crucial to learn how to properly create a fire on your stove. Incorrect techniques can lead to an unburned fire that doesn't burn effectively and can cause creosote or smoke. These tips will help you start a fire that will heat your home with the least effort and ensure your security.

Before you start a fire, you should check the condition of your coals and logs. If they are wet it will dampen your fire and prevent the proper burning. You might want to open the chimney to remove any ash that's fallen into the stove.

Start by placing some small wood burning fireplaces newspaper pieces that are dry into your stove. This will help to spark the tinder and ignite your kindling. When the tinder and the kindling have started to burn, you can put a layer of larger kindling pieces on top. This should be done in a crosshatch pattern so there is air between each piece of wood.

If your wood stove is equipped with an automatic combustion control, it will automatically pump air into the fire as it grows. This will help the fire to burn at a steady pace without having to constantly open the stove door to maintain it.

Avoid using excessive tinder since it will cause the fire to burn at an extremely fast rate and will not be able to use the fuel efficiently. If you have a solid bed of tinder and kindling in your stove, you can start the main fire by laying two large base logs across the grill. Then, you can lay an additional layer of smaller logs parallel to these and on top of the base logs. This method of creating an ember called a "top-down" fire will result in an effective and long-lasting fire that doesn't overtake the larger base logs.

Close the damper after the fire is established, and keep it closed. Doing this too soon could cause the fire to get smothered and not allow for the correct air flow, which can reduce its efficiency.

Adding Wood

Stoves can be used to heat your home efficiently and help you save money. They can be used by themselves or together with central heating or a furnace system to provide the additional heating required in large homes or houses with a lot of rooms. Many of the new clean burning stoves that are available on the market use an advanced combustion principle which is able to separate the burning volatile compounds from combustible gasses and tar. This is achieved by supplying air in two different stages. The first stage permits the vaporization of the volatile compounds and the second offers fresh air that is pre-heated. This improves the process of combustion and helps reduce the smell.

The amount of heat you will get from a stove depends on the species and the moisture content of the wood you use and also the dimensions of logs. To let the wood dry, the logs should be stored in a well ventilated space for a couple of months prior to burning. If the logs are too wet they will create lots of steam, which is essentially wasted energy.

While you're burning the fire, it is recommended to add more wood to the stack at intervals, but not all at once. Addition of too much wood at once can cause the temperature to rise in the firebox, creating an air vortex that draws smoke and volatile compounds that have not been burned back into the flames. This could decrease the efficiency of your stove wood Burning.

Avoid using other combustibles inside your stove such as paper or cardboard because they are not wood bruner. They have different physical properties and are unable to be burned without creating dangerously high temperatures. Also, you should not use compressed combustibles, such as wood briquettes as they have a very different chemical and physical composition to real firewood, and are not approved for use in wood burning stoves.

If you're installing a wood burning stove in your home, it's important to have it properly installed and tested by a professional. A certified WETT technician will test the installation to ensure proper operation and safety, as well as ensure that your chimney is operating correctly. These professionals can also offer maintenance services to keep your chimney and stove in tip-top shape. They can look for leaks in the areas accessible to your chimney and fix any issues they discover. They will also make sure that the occupants of your home know and follow the fire evacuation procedures in the event in the event of an emergency.

Adjusting the Damper

If you're not using your stove, a damper regulates the amount of heat lost through the chimney. Additionally, it can help you to control the flame. If the flue is open but the damper is not closed, the fire will not burn properly and smoke will billow into your home. To get the best fire with your damper set correctly, you have to experiment with different settings and observe how each affects the flames.

Typically, you'll want to keep the damper open enough to let air flow in and out of the flue when the fire is burning. This lets the fire get going and also helps keep it lit so you can enjoy it for a long time. A proper opening will stop the fire from becoming starved of air, and also prevent it from blowing smoke.

To adjust your damper properly first, make sure that the fireplace is preheated and the wood stove is hot. This will ensure the chimney is warm and it also has an adequate draft. After these steps are completed, the damper on the wood stove can be adjusted.

Once the fire has smolder a bit you should reduce the damper to around three-quarters of its original position. This will stop the warm air from the room from venturing into the chimney, but still allowing smoke to escape.

This is the best method to keep the fire from getting too hot, while also keeping it burning. The draft could be stopped if you shut the damper too far but a cold wind could be able to enter your home when the damper is left open.

You can determine how much the damper is open by placing your hand on the top of the of the flue pipe. If you can feel a slight draft pushing on your hand it is probably in the open position.

The damper settings may differ from one stove to the next and even between different kinds of wood. You can experiment with various settings to get a sense of the most suitable setting for your stove.

Clean up

After a fire, it is important to clean the stove and flue. This can reduce the risk of a chimney fire which is the most common cause of wood stove related fires in homes. Creosote, a sticky material that can accumulate within the stovepipe, can be extremely hazardous. The moisture and the unburned parts of wood that are unable to escape the flame are the reason for this chemical. It can also be caused by poorly lit fires.

A regular cleaning routine helps keep the buildup of creosote at bay. The most effective method for doing this is to sweep the chimney every year. It is also recommended that you get your stove and fireplace professionally cleaned and checked at least every year.

Also, it is recommended to clean the ash tray and grates regularly. It is recommended to use only seasoned wood to burn, since this will produce less creosote and less ash. It is also an excellent idea to avoid burning cardboard, paper plastic, and other waste items. These items can release dangerous chemicals to the air and flue that could end up in your home.

The glass in the wood stove has to be regularly cleaned too. Many modern wood stoves come with self-cleaning windows so they do not require as much cleaning. You can apply stove glass cleaners to the window if you're getting the glass as clean as you want on your wood stove.

Other suggestions to maintain your wood burners outdoor stove include turning down the vent when you're not using it and slamming doors or windows to improve airflow. This will keep the fire burning hotter, and more efficient. The wood stove won't have to perform as hard to circulate air. It is also a good idea to not stack logs or keep them in the fire for long periods of time, as this could lead to splitting and warping. It is recommended to avoid using combustible wood that has been compressed in your wood stove because the paraffin in them can melt and flow into the flue, which could cause damage.